The fuel gauge is a fundamental part of car maintenance and repair.The fuel system in your car.It helps you monitor the amount of fuel left in the tank, however, the gauge can sometimes malfunction, potentially leaving you stranded in the middle of the road without any fuel. Here, we review the main reasons that can lead to the malfunction of the gauge in your car:
Reasons for Damage to the Gas Mileage Meter
Cable damage
Cable damage is one of the reasons for a malfunctioning fuel gauge. This happens when they break or corrode due to many reasons, among the most important are:
Direct exposure to sunlight and high heat, which leads to the degradation of the cable's outer insulator and the corrosion of the internal wires.
2- Leaving the car in the sun for long periods without protection, which causes damage to the cables and the meter.
3- The leakage of fluids or chemicals onto the cables, which causes them to corrode.
4- Normal wear and tear over time, where the cables become fragile and crack and break, which leads to the malfunctioning of the meter.
To prevent damage to the cables and the car's gasoline meter, it is essential to carry out regular maintenance of the car and ensure the cables' integrity, protecting them from high heat and exposure to chemical substances.
The car cover can be used to protect it from sunlight. Care should be taken when connecting the cables and they should not be exposed to strong shocks.
2- Damage to the fuel sensor
The fuel sensor is one of the important factors that affect the operation of the petrol gauge. The main causes that can lead to damage to the fuel sensor and car petrol gauge are:
Chemical build-up and deposits inside the fuel tank where the fuel is stored, can lead to damage to the fuel sensor.
2- Using dirty or unsuitable fuel, as some types of fuel may contain impurities that can affect the fuel sensor and cause it to get damaged.
3- Damage to the cables that connect the fuel sensor to the meter, as these cables can be damaged due to exposure to weather conditions and temperature fluctuations.
4- Natural wear and tear over time, where the fuel sensor can be damaged due to prolonged use and natural aging of materials.
To avoid damage to the fuel sensor and gasoline meter, regular car maintenance should be conducted, and ensure the fuel sensor and meter's safety.
It is advised to use clean and suitable fuel for the car, and to regularly clean the tank. Caution should be exercised when using the car to maintain the safety of the vital components for the proper functioning of the car.
Also read:Discover 4 reasons for the damage to your car's fuel pump.
3- A fault in the electrical circuit
The fuel gauge can be damaged due to a fault in the electrical circuit responsible for its operation. This fault can occur due to the following factors:
1- Corrosion:
The electrical wires may be subject to corrosion due to exposure to weather conditions and humidity, which leads to a circuit break and disables the meter.
2- Electrical Shortage:
It refers to a direct connection between the wires of the electrical circuit, which can lead to interference in the operation of electrical devices and their damage. This electrical short circuit can occur as a result of damage to the electrical insulation in the wires.
3- Poor Connection:
It refers to the loss of connection between the electrical wires in the circuit, which leads to a malfunction of the meter. This failure can occur due to the accumulation of dust and dirt on the electrical wires.
4- Severed Wires:
Electrical wires can be completely cut due to exposure to high heat or tangling with other parts in the car, which leads to the disruption of the meter.
Regular maintenance and inspection of the electrical circuit can be used to prevent these problems and ensure the safe operation of the fuel gauge.
4- Blockage of the fuel connecting hose.
The fuel is transported from the tank to the engine via a fuel conduit hose. If this hose becomes clogged, this will result in the fuel not reaching the engine and consequently, the gauge will not work.
The Importance of the Gas Gauge
It is a device that displays to drivers the amount of remaining fuel in the tank, and it is one of the main components in the car's fuel system. The gauge represents significant importance for several reasons.
Determine the remaining amount of fuel.
When you have a working fuel gauge, you always know how much fuel is left in the tank, which helps you determine when you need to refuel. Therefore, you can avoid getting stuck on the road without gas.
2- Engine Protection
Running the engine on low fuel can lead to engine damage, but with an efficient fuel gauge, you can avoid this. When you know the amount of remaining fuel in the tank, you can plan to refuel before it runs out, thereby avoiding operating the engine on low fuel.
3- Saving money
The fuel gauge is also a useful tool for improving fuel efficiency and saving money in the long run. Drivers can monitor their fuel consumption and avoid excessive use, consequently saving money over time.
4- Reducing harmful emissions
When you have an active meter, you can control the amount of fuel you use, thereby reducing the harmful emissions that are released from the car. This contributes to preserving the environment and human health.
In general, the car's fuel gauge is considered one of the main components in the fuel system, and it is of great importance to drivers. It helps determine the amount of fuel remaining in the tank, protects the engine from damage, saves money in the long run, and reduces harmful emissions.
Therefore, drivers should maintain an effective and reliable petrol gauge, and routinely service it, while avoiding turning off the engine while driving, and not relying solely on the car's petrol gauge to determine the remaining fuel.The fuel tankBut you should also listen to the engine sound and monitor the fuel consumption in general.
Comments