The car's fuse is an essential part of any vehicle, controlling the operation of many devices within it. If a fault occurs in any of the fuses, devices running on them may stop working.
What affects the safety of the car and its ability to move correctly.
Therefore, it is essential to knowTypes of FusesDifferent types and methods to check them.
Types of Car Fuses
There are many different types of fuses available that can be found inside a car, and here are the main types of car fuses:
Glass Fuse
A glass fuse contains two open metal wires positioned inside the glass. In the event of a strong current in the electrical circuit, the fuse automatically cuts off the circuit to prevent damage from electrical intensity.
The condition of the fuse can be determined by examining the two wires inside the glass. If they are open or broken, the fuse has been cut off and therefore needs to be replaced.
Aluminum Fuse
The aluminum fuse is characterized by having two metal conductors connected to the head of the fuse. In the event of the circuit being exposed to excess electrical intensity, the circuit fuse cuts off to prevent damage to the connected devices.
The condition of a car's fuse can be checked by inspecting the metal connectors attached to the top of the fuse. If one of them is broken, this indicates that the fuse has been blown and needs to be replaced.
Screw Fuse
The screw fuse is characterized by having two metal screws connected to the fuse head. In case of excessive electrical current, the fuse cuts off the electrical circuit to avoid damaging the connected devices.
The condition of the fuse can be checked by examining the two screws on its top. If one of them is broken, this indicates that the fuse has been blown and needs to be replaced.
Wire Fuse
The wire fuse is characterized by having metallic connectors linked to the electrical wires, and the fuse cuts off the electrical circuit in case of an electrical surge, to prevent damage to the devices connected to it.
The condition can be examined.Car FuseBy examining the metal connectors, if any of them is broken, this indicates that the fuse has been cut and should be replaced.
Tin Fuse
The tin fuse contains a tin piece wrapped in insulating paper, and the fuse is connected to the electrical circuit through two metal connectors attached to the head of the fuse.
The fuse interrupts the electrical circuit in case of overcurrent to avoid damaging the devices connected to it. You can check the condition of the fuse by inspecting the tin piece. If it is burned or fused, this indicates that the fuse has been blown and needs to be replaced.
Also read:The 12 main reasons for car power loss and acceleration issues.
Battery Protection Fuse
In some cars, battery protection fuses are used to prevent the flow of electrical current to the battery in case of a circuit interruption. These fuses are characterized by being larger in size than regular fuses, and they are connected to the battery via the main battery cable.
To check the car's fuse, you should look for the box that contains it. This box may be in the engine or near the battery in some cars. Usually, the battery protection fuse is colored red to distinguish it from regular fuses.
The condition of the fuse should be carefully checked, ensuring there are no signs on the fuse indicating damage. If there are signs on the fuse, it should be replaced with a new one.
Method of Checking the Car's Fuse
When it comes to checking the fuses, the first step is finding the black box that contains the fuses. This box is mostly located under the dashboard or at the bottom of the dashboard. You can refer to the owner's manual to locate the box.
Once the box is found, the fuses should be carefully examined one by one. It is important to make sure that the fuses are appropriately placed and that they are not burnt out or broken. Burnt out fuses can easily be identified by examining the black lines that pass through the fuse. If these lines are broken, it means the fuse has blown and needs to be replaced.
A new fuse of the same electrical current required by the car must be used. Information on the correct current can be found in the owner's manual or on the old fuse that was replaced.
Necessary Precautions for Checking Car Fuses
Before starting to inspect the car's fuses, there are some necessary precautions that must be followed. It is essential to completely stop the car and wait a short while for the engine to cool down.
The excess electricity should also be discharged from the electrical circuit by discharging the previous electric charges through repeatedly pressing the brakes. You should wear gloves and protective glasses when checking the car's fuses to avoid any hazards. Also, make sure that the car is parked in a safe and level location before starting.
Fuses for signals and lighting
Fuses for signals and lighting are used to operate the car's headlights, tail lights, turn signals, brakes, reverse lights, and other important functions in the car.
You should check the condition of the fuses and ensure there are no signs on the fuses indicating damage. In case of any sign, it has to be replaced with a new fuse that complies with the same power and electrical current specified in the car manual.
How to replace a car fuse by yourself
When you encounter a problem with the electrical circuit in the car, checking the condition of the fuses might be the first step to fix the problem. Fortunately, replacing car fuses is not a difficult task and can easily be done at home.
The first step
This involves identifying the fuse that needs to be replaced, and then purchasing a new fuse from the original parts store or used parts shops.
The Second Step
Follow the instructions in the car manual to learn how to remove the old fuse and gently replace it with the new one. Also, make sure the new fuse is compatible with the same capacity and electric current specified in the car manual.
It should be noted that fuses of the same capacity and current specified in the car manual must be used. Avoid using fuses with greater or lesser capacities than specified, as this could damage the car's electrical circuit.
The third step
Changing the car fuses can easily be done at home, but one must follow the instructions in the car manual and make sure to use fuses that are compatible with the car. If you have any doubts or queries, you should consult a specialized maintenance technician to avoid any problems related to the car's electrical circuit.
The Conclusion
The car's fuse is a crucial component in operating many devices, and if it malfunctions, the car can become unsafe and immobile.
Therefore, we have presented you with 6 types of car fuses and how to check them, to keep your car running safely and properly.
Comments